MT 48 er et lydkort uten kompromisser. Her får du stor dynamisk range, fantastiske konvertere, preamper og hodetelefonforsterkere. Lydkortet setter en ny standard innen lydkvalitet. Med intern DSP kan du sette opp monitormikser med sofistikert EQ og dynamisk prosessering - alt enkelt kontrollert med touchskjerm-grensesnittet.

MT48 har nå fått Dolby Atmos støtte:
Monitor Mission forvandler MT 48 til en fritt konfigurerbar overvåkingskontroller. I tillegg til mono og stereo kan Monitor Mission også håndtere surroundformater som 5.1 samt svært utbredte lydformater som Dolby Atmos 7.1.4. Dette åpner for et helt nytt bruksområde, spesielt innen miksing.

• Klasseledende AD/DA-konvertere med enorm dynamisk range
• 2 premium mikrofon/linje-preamper, 2 premium linje/instrument-innganger
• 4 linje/monitor-utganger, 2 høykvalitets hodetelefonutganger
• USB, ADAT og AES67-tilkoblinger, integrert MIDI-interface
• Intuitivt brukergrensesnitt med touchskjerm
• DSP-prosessering (EQ, dynamikk, klang), 4 individuelle miksere
• To driverutganger per inngangskanal for pre-FX og/eller post-FX innspilling

Mic Inputs 1 -2

• Dynamic Range: 136 dB-A
• Equivalent Input Noise (150 Ohm): -128 dBu-A
• Input Impedance: 10 kO
• Gain Range: +12…+78 dB in 0.5 dB steps or 0.1 dB (fine)
• Pad: 12 dB/24 dB
• Max. Input Level: 0 /+12/+24 dBu (without Pad/with Pad)
• THD + N Preamp + ADC @ 1 kHz, 0 dBFS: < -110 dB (0.0003%)

Line Inputs 1-2

• Dynamic Range: 138.5 dB-A
• Input Impedance: 10 kO
• Gain Range: 0…+66 dB
• Sensitivity: +24 dBu…-42 dBu
• Max. Input Level: +24 dBu
• THD + N Preamp + ADC @ 1 kHz, 0 dBFS: < -105 dB (0.0006%)

Instrument/Line Inputs 3 - 4

• Dynamic Range: 135 dB-A
• Input Impedance: 2 MO (balanced)  / 1 MO (unbalanced)
• Gain Range: 0…+66 dB
• Sensitivity: +18 dBu … -48 dBu
• Max. Input Level: +18 dBu
• THD + N Preamp + ADC @ 1 kHz, 0 dBFS: < -112 dB (0.0003%)

Line/Monitor Outputs

• Output Impedance: < 70 O
• THD+N@ 1 kHz, 0 dBFS: < -110 dB (0.0003%)
• Dynamic Range: 123 dB-A
• Max. Output Level: +24 dBu

Headphone Outputs

• Output Impedance: 0.035 O
• Dynamic Range: 122 dB-A (high) / 117 dB (low)
• Max. Output Level: +16 dBu (high) /+8 dBu (low) 

• AES67/Ravenna: Standard RJ-45 Gigabit-Ethernet-Anschluss
• Expansion Connectivity: ADAT / S/PDIF optical I/O, MIDI I/O via 1/4” jack (DIN5 adapter set available from Neumann)
• Computer Interface: USB-C, 2.0 High Speed (480 MB/s) or higher
• Power Consumption: <25 W

The MT 48 brings Neumann quality to the digital workflow. It is the first audio interface in its class that is able to capture the full dynamic range of Neumann microphones and is optimally matched to the KH-Line of studio monitors and Neumann headphones. The result is an ideal signal chain without any bottlenecks: uncompromising sound quality from the microphone diaphragm to your ear.

SWISS PRECISION INSIDE

The MT 48 was developed in close cooperation with the Swiss manufacturer Merging Technologies, whose high-precision AD converters offer a staggering dynamic range of 136 dB. This gives the MT 48 four times the resolution of comparable audio interfaces.

The MT 48 comes fully equipped for the reference-class personal studio: two extremely low-noise mic/line preamps with up to 78 dB gain, two line/instrument inputs, four monitor/line outputs and two superb headphone outputs, each with state-of-the-art AD/DA converters. The MT 48’s connectivity may be expanded via ADAT / S/PDIF and AES67; a MIDI interface is also integrated. Four separate monitor mixes can be controlled directly on the unit via touchscreen. On-board processing includes a fully parametric 4-band EQ and a 3-way dynamics processor (gate/compressor/limiter) per channel as well as a high-quality reverb. So musicians get inspiring sound for top performances. And there is still plenty of DSP power for future developments.