SM-KP5 is an adapter plate for Kali Audio IN-5 speakers. Easily
installed by removing the 4 side screws from the back panel of the IN 5
and attaching the adapter plate with the same hardware. This is
applicable for V2 (2nd Wave) Kali Audio monitors.
NOTE: The SM-KP5 can be mounted in an inverted fashion (upside down) to
allow for a greater tilt angle without the speaker touching the wall.
CAUTION: If your Kali speaker does not say “Wall/Ceiling Mountable” on
the lower left of the amplifier panel, DO NOT install this plate, nor
attempt to mount the speaker to a wall or ceiling. If you are unsure of
your monitor revision, please contact Kali Audio with your Serial Number
for confirmation.