2016997
/search
ProlydD4
Oppdaterer, vennligst vent...
Produkter
Se hele resultatet...
Kategorier
Merker
Merkenavn
Artikler
Antall artikler funnet:
AMS Neve 1073N
Micpre EQ. klassiker i liten format.
Classic transformer microphone preamp amp (Class A design) with integral DI input and Phantom Power.
Exclusive Neve® Marinair™ transformers used on input and output stages.
3 EQ bands & HP filter.
Can be used as a standalone module or inserted into a compatible rack or console.
Mic & Line inputs are transformer balanced and earth free.
Microphone Input: Gain +80db to +20dB in 5dB steps.
Designed and built in England.
Line Input: Input impedance 10k ohms, gain +20dB to -10dB in 5dB steps.
DI Input: Input impedance 10M Ohms (PAD off) / 10K Ohms (PAD on) Gain +80dB to +20dB in 5dB steps.
Output: Maximum output is >+26dBu into 600O.
Output is transformer balanced and earth free.
Distortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output.
(80kHz bandwidth) into 600O.
Freq Response: ±0.5dB 20Hz to 20kHz, -3dB at 40kHz. EQ Out.
Tilbehør
Alternativer
Artikler
Antall artikler funnet:
MIN SIDE
Logg inn
Ingen varer i handlevognen
Ingen varer i ordreboka
produkt
produkter
(
)
(
)
(
)
Til kassen
×
Aktiv leveringsdato
Leveringsdatoer
Ordre oversikt
Handlevogn
varer i handlevognen
Klikk her for å se alle
Handlevognen er tom.
Søk
Her er du nå:
ProLyd
>
Produkter
>
Mikrofonforsterkere
>
Preamp mono
>
AMS Neve
>
AMS Neve 1073N
AMS Neve 1073N
Micpre EQ. klassiker i liten format.
Varenr:
115889
-
+
Kjøp
Utsolgt (
56
dager)
Send meg mail når varen er på lager
E-post varsling
×
Legg vare til varsling
Beskrivelse
RESSURSER
Gå til kjøp
Kjøp
Beskrivelse
Classic transformer microphone preamp amp (Class A design) with integral DI input and Phantom Power.
Exclusive Neve® Marinair™ transformers used on input and output stages.
3 EQ bands & HP filter.
Can be used as a standalone module or inserted into a compatible rack or console.
Mic & Line inputs are transformer balanced and earth free.
Microphone Input: Gain +80db to +20dB in 5dB steps.
Designed and built in England.
Line Input: Input impedance 10k ohms, gain +20dB to -10dB in 5dB steps.
DI Input: Input impedance 10M Ohms (PAD off) / 10K Ohms (PAD on) Gain +80dB to +20dB in 5dB steps.
Output: Maximum output is >+26dBu into 600O.
Output is transformer balanced and earth free.
Distortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output.
(80kHz bandwidth) into 600O.
Freq Response: ±0.5dB 20Hz to 20kHz, -3dB at 40kHz. EQ Out.
RESSURSER
Produsent
Support
Copyright © 2024 Prolyd AS - All rights reserved
Forretningssystem
og
nettbutikkløsning
levert av
Multicase™ Norge AS
Logg inn / Ny kunde
Registrer meg som kunde
MIN SIDE
Tilbake